Cleaning and maintenance of oil filter element
The oil filter element is used to keep the hydraulic oil clean in the oil filter.How to ensure the cleanliness of the oil for a long time, the key lies in our correct use!
First of all, we should choose the filter element of the oil filter correctly, because the model between the filter element and the equipment is matched, and if it is not selected properly, it will affect the filtration effect.
Second: The filter element of the oil filter machine requires us to clean and replace it in time, because during the time of purifying the oil, the impurities in the oil are gathered on the filter element, and the unclearness for a long time will cause the oil filter to slow down. If the quality of the oil is not clean enough. Third: The shaft pressure cannot be increased during use. If so, the oil can pass through the filter faster, but it will often crush the filter element and affect the cleanliness of the hydraulic oil.
In order to ensure that the filter element of the oil filter is clean, we must clean the filter element of the oil filter in a timely manner. Now the method is introduced as follows:
1. Before cleaning the oil filter machine, the operation of the oil filter machine must be stopped, the oil inlet and outlet pipes should be closed, and the power switch should be turned off.
2. Open the oil drain valve and drain all the oil in the filter until the oil flow is completed (the air drain valve can be opened during oil drain to speed up the oil drain).
3. Open the filter cover and remove the filter element when it is finished.
4. The filter element of the vacuum oil filter, take out the filter element and put it into an oil pan filled with kerosene, wash it after soaking for 30 minutes, and blow it off with air.
5. Use a brush to remove the sediment on the surface of the filter, and then wipe the filter clean with a rag.
6. Then install the filter element and tighten the filter bolts. Can only be put into use after cleaning.
7. When the filter's fouling capacity reaches its limit, it should be replaced.